How To Properly Connect Media Sources With HDMI Cables

HDMI cables represent the latest and most significant innovation in this domain. They ensure an amazing video quality, but the sound is not ignoring either. Since the signal is no longer converted for two times during an analogue transmission, the quality is unaltered, leading to an impressive result. Basically, such cables can be used to connect any media sources, including consoles, phones, cameras and computers. Therefore, you must analyse your necessities before investing in a cable. Think about the length as well. Most manufacturers do not exceed 16 feet, but special needs require special orders. Finally, the good news is that connecting such modern tables does not ask for a degree in computer science. It is piece of cake, but also similar to the procedures used for any other types of cables.

Steps to properly connect a HDMI cable

The cable must be long enough to combine the two media sources without floating in the air. It makes no difference how carefully you measure the distance. It is always recommended for the cable to be a couple of feet longer, just in case. Other than that, it should be long enough to be properly places under carpets or around the walls. In other words, do not measure the distance through the air. Instead, use a wire for more appropriate measurements. The price is also influenced by the cable length, but it is just as important for the cable to be properly connected in order to avoid losing the signal or tripping on it.

Once you have the cable, it is time to establish the connection. The modern devices label the HDMI inputs. Most commonly, the port will say HDMI IN. However, this is not a general rule. In some cases, you might have to visually inspect the cable plug and the ports on the back of your television set. Some units come with more ports. In this case, plug the cable into the main or primary one.

The same procedure must be followed for the satellite box too. Some home owners might end up with digital receivers. The plugs are identical though. They look like the television ports, so there is no way to fail finding them. Before plugging the cable in, you must double check all of it to avoid kinked or twisted parts. If you reveal any problems, rotate the cable accordingly until it is completely straight. Avoid adding too much pressure on it.

Finally, check both heads and ensure that they are properly connected. The connection must be tight and stable. This is the best way to get a powerful and clear signal. There are situations when the signal might not be too strong, yet people have no idea that their HDMI cables are improperly connected. Therefore, some parts of the signal may reach to the television set in this case too.


Connecting two media sources with a HDMI cable is very easy and does not require any professional help. As long as you have the patience to do it and you are willing to spend a few minutes of your time, it can be a great do-it-yourself project.